DIN-RC 1
| Part No. | 80189 |
| EAN | 4251269324345 |
| Package quantity | 1 |
available
-
Products
?
Hydraulic punch drivers & DIN rail cutters
?
DIN-RC rail cutter
DIN-RC rail cutter
for top hat DIN rails & bus bars, with length stop 1000 mm
The DIN-RC cutter cuts various DIN rails with little effort and accurately. The cut is clean and free of burrs; there is no waste.
The length stop with guiding device ensures that nothing slips while cutting and that the cut is always 90¡ã at an exact angle. Thanks to the optimal power transmission of the cutting device, only little effort is required.
The DIN-RC 1 is suitable for cutting:
- DIN top hat rails 35 x 7.5 mm
- DIN top hat rails 35 x 15 mm
The DIN-RC 2 is suitable for cutting:
- DIN top hat rails 35 x 7.5 mm
- DIN top hat rails 35 x 15 mm
- DIN top hat rails 15 x 5.5 mm
- Bus bars 10 x 3 mm
Not suitable for stainless steel rails!
Advantages & benefits
- Cuts the most common DIN top hat rails 35 x 7.5 mm, 35 x 15 mm and 15 x 5.5 mm as well as bus bars 10 x 3 mm
- Exact 90¡ã cuts
- Burr-free cuts
- With length stop 1000 mm and guiding device
Product types & sizes
DIN-RC 2
| Part No. | 80190 |
| EAN | 4251269323942 |
| Package quantity | 1 |
available
You haven't found anything suitable yet?
Try the ProductFinderProduct video
Convince yourself of the simple and time-saving use of our products.
Watch the product video!
DIN-RC 1: 0:00 - 0:52
???????DIN-RC 2: 0:53 - 1:37
Suitable for:
You might also be interested in the following products
Punch drivers
Punch driver sets
Hydraulic punch driver for cut-outs on V2A stainless steel, sheet steel, aluminium or plastics. Suitable for round and rectangular punches. Also available with knockout die sets metric M16 - M63.
KZL
Strain relief plates for DIN rails
Strain relief and cable routing plates for snap-on assembly on 35 mm top hat DIN rails and C section rails C30.
SF|ZL
Strain relief plates for 35 mm top hat DIN rails
Strain relief plate for mounting via snap feet on 35 mm top hat DIN rails.
KBH-R | KBH-S
Holders for hook-and-loop tapes
Holders for hook-and-loop cable ties and tapes. Various mounting types.
Shield clamps for 35 mm top hat DIN rails
EMC cable shield clamps for 35 mm top hat DIN rails
EMC cable clamp for snap-on mounting on 35 mm top hat DIN rails.
Clamp assembly for 35 mm top hat DIN rails
EMC cable clamp assembly for 35 mm top hat DIN rails
EMC cable clamp assembly with shield clamps for EMI shielding of up to 12 lines.
Shield clamps for bus bars
EMC cable shield clamps for bus bars
EMC cable clamps for snap-on mounting on 10 ¡Á 3 mm bus bars.
Shield brackets with compression spring
EMC shield brackets with compression spring
EMC shield brackets with compression spring for screw mounting, top hat rails, C section rails or bus bars.