KEL-DPU-OD | Kabelgenomf?ringsplatta multi-membran

f?r extrema f?rh?llanden, med stark dragavlastning / IP66 / IP68 / UL Type 4X

Best?ll ett gratis produktprov!

The KEL-DPU-OD is ideally suited for applications in which cable entry components are permanently exposed to strong UV radiation, weathering and temperature fluctuations. Compared to standard versions, it offers increased material resistance and extended service life in outdoor environments. Thanks to its approvals, it is particularly suitable for the use in photo?voltaic systems (UL 6703, UL 6703A, UL 3703, UL 1703).

F1 listing (UV and weather resistance according to UL 746C): The long-term durability means an increased service life without embrittlement or material fatigue.

KEL-DPU-OD entry plates are designed to route and seal cables without connectors (from 3.2 mm to 20.5 mm in diameter) in limited space with IP66 / IP68* / UL type 4X ratings. The gland KEL-DPU-OD is especially characterised by its very robust hard frame made of polypropylene which is completely moulded with elastomer. This results in a high ingress protection and stability as well as in a high strain relief level of the routed cables.

The KEL-DPU 24-OD matches exactly the cut-out dimensions of 24-pin standard industrial connectors. For optional screw assembly just pierce the membranes on the integrated screw holes with the screw itself. When plugging the KEL-DPU-OD from the inside of the enclosure the screw holes remain completely sealed by the elastomer layer.

The assembly of the KEL-DPU-OD with cables can be done quick and easy. Simply make a small hole in the thin membrane and push the cables through.

ST-B Plugs can be used for sealing pierced membranes if cables have been removed.

It is also possible to integrate threaded bushings. Please ask us about your desired variant.

The version with threaded bushings enables the cable entry plate to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.

* IP65/IP66/IP67/IP68 when screw mounted, IP65/IP66 when snapped into the cut-out

Specifikationer

IP-Klass (EN 60529) IP54, IP55, IP64, IP65, IP66, IP67, IP68
UL Type (UL 50E) UL Type 4X
Brandklass UL94-V1
Temperatur ?40 C¡ã till 120 C¡ã
Material Elastomer (UV-best?ndighet F1)
Basramen: Polyamid
Monteringstyp Skruvmontering, Snap-in
Egenskaper silikonfri, vibrationss?ker, UV-best?ndig

F?rdelar

  • H?g stabilitet, vibrationst?lig
  • Tillf?rlitligt skydd i extrema klimatmilj?er
  • F1-klassning (UV- och v?derbest?ndighet enligt UL 746C)
  • Snabb och enkel montering
  • H?g kabelt?thet
  • Certifierade skydd typer IP66/IP68 (efter EN 60529)

Produkttyper och storlekar

Hittade du inte n?got l?mpligt ?n?

Prova v?r ProductFinder

Monteringsvideo


?vertyga dig sj?lv om den enkla och tidsbesparande monteringen av v?ra produkter.

Kolla in monteringsvideon!

Montera bara kabelgenomf?ringsramarna och kabelf?rskruvningarna med genomf?ringar

Hitta alltid r?tt ram och genomf?ringar f?r din kabelgenomf?ring!

L?mpliga tillbeh?r

L?mplig f?r:

Du kanske ocks? ?r intresserad av f?ljande produkter